A4+ LTCMASTER

Description

Surpassing its predecessor by a big margin, A4+ reaches a spectacular 620Mh/s (±8%), with 750W (±8% @25℃) at the wall, offer its customers best mining competitive advantage, significantly lower operating cost, higher ROI and longevity. It has a small form factor, low noise, better quality and more reliable, designed to win and possess best ever resell values.

Part Number: INNOSILICON A4+ LTCMaster
Hashrate: 620Mh/s (±8% performance, can be over-clocked at user’s risk)
Power Consumption: 750W ±8% (normal mode, at the wall, with 93% efficiency PSU. 25°C temperature )
Dimensions: (L)350mm*(W)125mm*(H)155mm (dual tube)
Net Weight: 4.2KG (without PSU)
Voltage: +12V
Required rated PSU: 1000W or above, 9 * PCI-E 6Pin INCLUDED
Cooling: air-cooled with 2 fans
Internet Connection: Ethernet
Ambient Temperature: 0°C to 40°C
Power supply connection: 2 PCIE port per power board.

Please be aware: 1400W PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.

If you wish to order PSU with more than 1600W power, please purchase AC cable with 3*1.0 specifications, and 3 wire cores with diameter no less than 1.0mm.

Warranty
Miner sales is different from the general consumer electronics products, which are specially customized according to customers’ needs. Please notice before purchase. The post-sales service policy is as follows. After payment, your order will be processed immediately.

180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave an after-sales message on Innosilicon message board. The technical support team will get in touch with you asap.

Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

The price of miners may be adjusted in response to market condition changes at any time without prior notice or price compensation to customers.

The warranty expires in the following cases:

Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in a overheating environment.

If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

See Terms and Conditions published on Innosilicon website www.innosilicon.com