TERMINATOR 3 – 43T Miner

Description

The Innosilicon Terminator3 miner adopts innovative architecture to generate powerful SHA256 43TH/s (± 5%) hash rate with only 2100W (+/- 10%). The 48.83W/TH performance is pushing the limit and will give you the unbeatable advantage in mining in the foreseeable future among all technologies.

INNOSILICON T3 is designed to be the long lasting product with many improvement over its predecessors for longevity. It adopts the state-of-the-art technology with the innovative dynamic frequency scaling and extra cooling system for added efficiency and reliability. Yes, the miner is built for improved durability.

Hashrate: 43TH/s (±5%)
Power Consumption: 2100W ±10% (normal mode, at the wall, with 93% efficiency PSU, 25°C temperature )
Dimensions: Single Tube, 430mm（L）*141mm(W)*220mm（H）
Ambient Temperature: 0°C to 40°C
Network Connection: Ethernet
Note: ASIC Boost Enabled with a proper license

Please be aware: T3 PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.

T3 PSU is more than 1800W, so please purchase AC cable with 3*1.5 specifications, and 3 wire cores with diameter no less than 1.5mm.

Warranty
All Innosilicon T3 will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.

180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave an after-sales message on Innosilicon message board. The technical support team will get in touch with you asap.

Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

The price of miners may be adjusted in response to market condition changes at any time without prior notice or price compensation to customers.

The warranty expires in the following cases:

Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in a overheating environment.

If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

See Terms and Conditions published on Innosilicon website www.innosilicon.com