T2T – 25T BTC Miner

Description

Innosilicon, the industry leader of all coin crypto mining ASICs, launches another heavy weight BTC miner, the T2T-25T (also has 4 work modes). In the high power mode, the hash rate of Innosilicon T2T-25T miner is 25Th/s (± 5%), energy consumption is only 2050w (+ 10%).

Hashrate: 25TH/s (±5%)
Power Consumption: 2050W + 10% (nominal mode, at the wall, with 93% efficiency PSU, 25°C temperature )
Dimensions: Single Tube, 391mm（L）*141mm(W)*220mm（H)
Net Weight: 9.0KG
Ambient Temperature: 0°C to 45°C
Network Connection: Ethernet

T2T-25T Miner has 4 work modes as follows:

Performance / High power Mode
Hash Rate: 25T±5%
Power: 2050W+10%

Factory Mode /Default (Recommended mode)
Hash Rate: 23T±5%
Power: 1880W+10%

Balanced Mode
Hash Rate: 21T±5%
Power: 1550W+10%

Efficiency Mode
Hash Rate: 20T±5%
Power: 1360W+10%

Please be aware: T2T-25T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.

T2T-25T PSU is more than 1800W, so please purchase AC cable with 3*1.5 specifications, and 3 wire cores with diameter no less than 1.5mm.

Warranty
All Innosilicon T2T-25T will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.

180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on Innosilicon message board. The technical support team will get in touch with you asap.

Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

The price of miners may be adjusted in response to market condition changes at any time without prior notice or price compensation to customers.

The warranty expires in the following cases:

Miner is demolished, privately altered or component replacement by customers;
Lightning, voltage surges, poor quality power supply causing damage;
Circuit boards and components damaged by water, exposed to moisture or corroded;
The circuit board or the chip is completely burned;
Excessive Over-clocking in a overheating environment.

If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.

See Terms and Conditions published on Innosilicon website www.innosilicon.com